#Focusrite midi monitor pro#
#Focusrite midi monitor series#

#Focusrite midi monitor pro#

Note, if you do not see the PRE controls at the top of the mixer window, click the “Mix Window View Selector” in the bottom left corner and select Mic Preamps.įor best operation, it is recommended that RedNet 4 / RedNet MP8R / RedNet X2P and RedNet Control are running before Pro Tools is launched. Pro Tools will now control RedNet 4, RedNet MP8R, RedNet X2P, Red 4Pre, Red 8Pre, Red 8Line and Red 16Line devices.Here, assign the mic pres to the corresponding input channels. Click Setup > I/O and click the Mic Preamps tab.“Receive From” and “Send To” must be set to “RedNet Control” and the same channel number set in RedNet Control. Click Setup > Peripherals and click the Mic Preamps tab.Click Setup>MIDI>Input Devices… and ensure the box next to RedNet Control is checked.

The following settings must be set within RedNet Control: Setting Selection MIDI Input Device RedNet Control MIDI Output Device RedNet Control MIDI Input Protocol Avid Pre (CC) MIDI Output Protocol Avid Pre (CC) RedNet 4 / RedNet MP8R / RedNet X2P MIDI Channel Allocation 1–16 RedNet Control must be installed on the same computer as Pro Tools. Therefore when controlling the same unit from a different computer, the MIDI channel allocation may no longer be the same.

MIDI channel selection is saved with the computer, not the device.

Two devices should not be set to the same MIDI channel.

16 channels are available, allowing a maximum of 16 independent device control paths.

MIDI Channel Allocationīy clicking on the “spanner” menu of any RedNet 4, RedNet MP8R, RedNet X2P, Red 4Pre, Red 8Pre, Red 8Line or Red 16Line, a MIDI channel can be selected to which the unit will respond. The preamps onboard the 18i20 now boast Focusrite’s celebrated ‘Air mode’ which delivers the adored ‘Air effect’ that accurately recreates the iconic ‘ISA’ console transformer to enhance your voice and instruments tracking with a much brighter sound.įire the 18i20 up and give your audio the production it deserves with the stellar Scarlett 18i20.Choose the input protocol RedNet Control shall send. This, the 3rd gen Scarlett 18i20 takes the state-of-the-art USB audio interfaces to even greater heights with two newly designed and upgraded Scarlett mic preamps, high-performance 24-bit/192kHz AD/DA converters, enhanced preamp gain structure, incredibly low latency and instrument inputs capable of handling scorching hot pickups. Focusrite ensured the 18i20 had all the additional features one could need too, onboard talkback, 8-channel LED bar-graph meters, dual headphone outs and speaker switching for dual-monitor setups. You’ll also find 6 further XLR combo inputs, alongside 8 channels of ADAT I/O, S/PDIF and MIDI I/O, and word clock out. Dual Focusrite mic/instrument preamps are located on the 18i20’s front panel directly where you’d need them, whilst the rear panel is home to an abundance of extra I/O – up to 18-in/20-out simultaneously. The 18i20 is packs serious firepower into a super-affordable package.

#Focusrite midi monitor series#

Focusrite’s 3rd generation of their lauded ‘Scarlett’ series has collected hordes of adoring fans, and the ‘18i20’ is at the forefront of this range.